Shop – vBotTech https://vbottech.com Robotics, CNC and Motion Controls Fri, 30 Jan 2026 22:13:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://vbottech.com/wp-content/uploads/2023/03/vbottech-logo-icon-60x60.png Shop – vBotTech https://vbottech.com 32 32 CNC Router Z-Axis Linear Stage Slide Kit 5.75″ Travel for Mill or Router DIY https://vbottech.com/product/cnc-router-z-axis-linear-stage-slide-kit-5-75-travel-for-mill-or-router-diy/?utm_source=rss&utm_medium=rss&utm_campaign=cnc-router-z-axis-linear-stage-slide-kit-5-75-travel-for-mill-or-router-diy Mon, 04 May 2020 21:27:33 +0000 https://vbottech.com/?post_type=product&p=717
CNC Router Z-Axis Linear Stage Slide Kit 5.75″ Travel for Mill or Router DIY

 

Travel: 5.75″ Stroke
Linear Rails and Blocks
Mount Type: Makita 1.25HP RT0701C Router  (mount is included)
Stepper Motor Mount: for Nema 23 (Stepper Motor Not Included)
Motor Coupler included for 0.25″ shaft
Includes Home Switches
Back plate dimension: 4.00″ x 9.0″ X 0.25″
Mouting Hole: 90mm (3.54″) Outside width, 30mm (1.18″) Inside width, 50mm (1.97″) or 100mm (3.94″) High #10 or 5mm Screws
Motor Mount: for Nema 23 (Motor Not Included)
 
NEMA 23 Stepper Motor NOT INCLUDED
Router Spindle NOT INCLUDED




]]> CNC Plasma Table Z-Axis with Precision Linear Rail and Floating Head THC https://vbottech.com/product/plasma-z-axis-sl-z5375-p2/?utm_source=rss&utm_medium=rss&utm_campaign=plasma-z-axis-sl-z5375-p2 Sun, 15 Dec 2019 04:54:05 +0000 https://vbottech.com/?post_type=product&p=660 Z-Axis for CNC Plasma Table with Precision linear rail and floating head
Travel: 5.375″ Stroke
Mount Type: Plasma Machine torch with 1.375″ diameter (35mm)
Motor Mount: for Nema 23 (Not Included)
Leadscrew pitch: 8mm per turn
Includes Home Switch
Includes Part Touch Switch
Back plate dimension: 4.00″ x 9.0″ X 0.25″

Mouting Hole: 90mm (3.54″) Outside width, 30mm (1.18″) Inside width, 50mm (1.97″) or 100mm (3.94″) High #10 or 5mm Screws

Motor Mount: for Nema 23 (Motor Not Included)
NEMA 23 Stepper Motor NOT INCLUDED

 

 

 

 

 

TORCH NOT INCLUDED
  
]]> CNC Router | Dust Hood/Boot/Shoe | with Clear Skirt for Makita RT0701C https://vbottech.com/product/cnc-router-dust-hood-boot-shoe-with-clear-skirt-for-makita-rt0701c/?utm_source=rss&utm_medium=rss&utm_campaign=cnc-router-dust-hood-boot-shoe-with-clear-skirt-for-makita-rt0701c Mon, 02 Dec 2019 03:32:40 +0000 https://vbottech.com/?post_type=product&p=655 Dust shoe with clear skirt for Makita RT0701C  1.25HP Router for CNC Machines
Two halves are held by strong magnets and allow for quick bit changes. Vacuum attachment port for 2 ½” hose (Shop vac).
Overall size: 3.3” x 6.5” x 4.0”
Material: Plastic
Color: Black





* Router and vacuum hose not included.
Checkout our router mount that will work perfect with this hood.
]]> CNC Router | Dust Hood/Boot/Shoe | for Makita RT0701C https://vbottech.com/product/cnc-router-dust-hood-boot-shoe-for-makita-rt0701c/?utm_source=rss&utm_medium=rss&utm_campaign=cnc-router-dust-hood-boot-shoe-for-makita-rt0701c Tue, 19 Nov 2019 06:38:25 +0000 https://vbottech.com/?post_type=product&p=640 Dust shoe for Makita RT0701C  1.25HP Router for CNC Machines
Two halves are held by strong magnets and allow for quick bit changes. Vacuum attachment port for 2 ½” hose (Shop vac).
Overall size: 3.3” x 6.5” x 2.25”
Material: Plastic
Color: Gray/Silver

* Router and vacuum hose not included.
Checkout our router mount that will work perfect with this hood.
]]> Tabletop CNC Router (/w 1HP Water-Cooled Spindle & VFD) https://vbottech.com/product/tabletop-cnc-router-custom/?utm_source=rss&utm_medium=rss&utm_campaign=tabletop-cnc-router-custom Wed, 28 Aug 2019 20:10:34 +0000 https://vbottech.com/?post_type=product&p=583 CNC Router or Milling machine with a working envelope of  13" by 7" by 4.5" Travel (Upgrade to 1HP Water-cooled spindle and VFD Control) ]]>
The machine is completely assembled and testing and ready to cut right out of the box. No assembly required. Table top is T-Slot Aluminum for easy part hold down. This machine uses Rigid Linear Guide Ways on all axis, unlike other machines of this size which usually uses round guide shaft that are only supported on the ends.  All Drive system uses precision stainless steel lead-screw with anti-backlash nuts. This machine is specially designed with a box frame that allow for panels to be added the the frame and have it fully enclosed and keep dust in the machine while cutting and also added safety.

 
Travel:
X = 13″ (1320mm)
Y = 7″ (1320mm)
Z = 4.5″ (130mm) (Z clearance under gantry is 3.5″)
 
Overall footprint: 19.75″ x 17.25″ x 18″ (500x 440 x 460mm)
Table Top Size: 11.5 x 7.5″ (290mm x 240mm)
 
Includes:

* Fully supported Linear Guide Ways on X, Y and Z
* Spindle (1HP/800W Spindle with VFD)
* Spindle Mount
* 3 NEMA 23 Stepper motors
* 3 Smooth Stepper Drives
* USB Motion Controller board (with up to 100 kHz operation)
* Pre-wired and ready to cut
* Home Switches on all axis
* Spindle Control (Automatic on/off of Spindle and RPM via G-Code)
* Switching Power Supply
* Dust Proof Control Box
* GRBL Controller over USB Connection
* Copy of Candle Controller Software and Machine profile on USB Stick

Required to finish:
* Control computer (Windows XP to Windows10 with USB port)
* Copy of Mach3 License
* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)
NOTE: This machine comes with Water-Cooled spindle with VFD and NOT Mikta Trim Router

]]> CNC Router Machine 50″x100″ (4’x8′) Econoline https://vbottech.com/product/vb9850e-s/?utm_source=rss&utm_medium=rss&utm_campaign=vb9850e-s Fri, 17 May 2019 23:09:10 +0000 https://vbottech.com/?post_type=product&p=569 Note: This is a custom size machine base on the 4×4 with the Y axis lengthen to 100″ Travel. 

This is a CNC Router or Milling machine with a working envelope of 50″ by 1000″ or  (1270mm x 2560mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1270 mm)
Y = 100″ (2560mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 64″ x 108″ x 18″ (1620 x 2750 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23 stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> CNC Router Machine 50″x50″ (4’x4′) Econoline (Free Shipping) https://vbottech.com/product/vb5050e-s/?utm_source=rss&utm_medium=rss&utm_campaign=vb5050e-s Thu, 16 May 2019 19:39:23 +0000 https://vbottech.com/?post_type=product&p=562

This is a CNC Router or Milling machine with a working envelope of 50″ by 50″ or (1280mm x1280mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1275 mm)
Y = 51″ (1300 mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 63″ x63″ x 18″ (1600 x 1600 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> CNC Router Machine 50″x50″ (4’x4′) Econoline https://vbottech.com/product/vb5050e/?utm_source=rss&utm_medium=rss&utm_campaign=vb5050e Tue, 02 Apr 2019 06:38:30 +0000 https://vbottech.com/?post_type=product&p=506

This is a CNC Router or Milling machine with a working envelope of 50″ by 50″ or (1280mm x1280mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1275 mm)
Y = 51″ (1300 mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 63″ x63″ x 18″ (1600 x 1600 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> CNC Router/Spindle Mount Clamp Holder Kit for Makita RT0701C 1.25HP – DIY https://vbottech.com/product/router-mount-makita-rt0701c/?utm_source=rss&utm_medium=rss&utm_campaign=router-mount-makita-rt0701c Sun, 10 Mar 2019 07:13:34 +0000 https://vbottech.com/?post_type=product&p=485 CNC router bracket / mount isintended for a Makita Model RT0701C or simliar router that has a  a diameter of 2.55″. It is precision machined from 6061 aluminum

 

Router is not included!!!

Bolt pattern for mounting is 4.0″ wide by 1″ high and also 2.5″ wide by 1″ high for #10 for M5 Allen screws.

]]> Tabletop CNC Router https://vbottech.com/product/desktop-cnc-router-13x07/?utm_source=rss&utm_medium=rss&utm_campaign=desktop-cnc-router-13x07 Sat, 09 Mar 2019 16:16:44 +0000 https://vbottech.com/?post_type=product&p=480 CNC Router or Milling machine with a working envelope of  13" by 7" by 4.5" Travel]]>
The machine is completely assembled and testing and ready to cut right out of the box. No assembly required. Table top is T-Slot Aluminum for easy part hold down. This machine uses Rigid Linear Guide Ways on all axis, unlike other machines of this size which usually uses round guide shaft that are only supported on the ends.  All Drive system uses precision stainless steel lead-screw with anti-backlash nuts. This machine is specially designed with a box frame that allow for panels to be added the the frame and have it fully enclosed and keep dust in the machine while cutting and also added safety.

 
Travel:
X = 13″ (1320mm)
Y = 7″ (1320mm)
Z = 4.5″ (130mm) (Z clearance under gantry is 3.5″)
 
Overall footprint: 19.75″ x 17.25″ x 18″ (500x 440 x 460mm)
Table Top Size: 11.5 x 7.5″ (290mm x 240mm)
 
Includes:

* Fully supported Linear Guide Ways on X, Y and Z

* Spindle (Makita 1.25HP Router)

* Router Mount
* 3 NEMA 23 Stepper motors
* 3 Smooth Stepper Drives

* USB Motion Controller board (with up to 100 kHz operation)
* Pre-wired and ready to cut
* Home Switches on all axis
* Spindle Relay Module (Automatic on/off of Spindle)
* Switching Power Supply
* Dust Proof Control Box
* Demo Copy of Mach3 on USB Stick and Machine Profile so setup is easy (Requires Mach3 License)
 
Required to finish:
* Control computer (Windows XP to Windows10 with USB port)
* Copy of Mach3 License
* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)

]]>