CNC Machines – vBotTech https://vbottech.com Robotics, CNC and Motion Controls Fri, 30 Jan 2026 22:13:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://vbottech.com/wp-content/uploads/2023/03/vbottech-logo-icon-60x60.png CNC Machines – vBotTech https://vbottech.com 32 32 Tabletop CNC Router (/w 1HP Water-Cooled Spindle & VFD) https://vbottech.com/product/tabletop-cnc-router-custom/?utm_source=rss&utm_medium=rss&utm_campaign=tabletop-cnc-router-custom Wed, 28 Aug 2019 20:10:34 +0000 https://vbottech.com/?post_type=product&p=583 CNC Router or Milling machine with a working envelope of  13" by 7" by 4.5" Travel (Upgrade to 1HP Water-cooled spindle and VFD Control) ]]>
The machine is completely assembled and testing and ready to cut right out of the box. No assembly required. Table top is T-Slot Aluminum for easy part hold down. This machine uses Rigid Linear Guide Ways on all axis, unlike other machines of this size which usually uses round guide shaft that are only supported on the ends.  All Drive system uses precision stainless steel lead-screw with anti-backlash nuts. This machine is specially designed with a box frame that allow for panels to be added the the frame and have it fully enclosed and keep dust in the machine while cutting and also added safety.

 
Travel:
X = 13″ (1320mm)
Y = 7″ (1320mm)
Z = 4.5″ (130mm) (Z clearance under gantry is 3.5″)
 
Overall footprint: 19.75″ x 17.25″ x 18″ (500x 440 x 460mm)
Table Top Size: 11.5 x 7.5″ (290mm x 240mm)
 
Includes:

* Fully supported Linear Guide Ways on X, Y and Z
* Spindle (1HP/800W Spindle with VFD)
* Spindle Mount
* 3 NEMA 23 Stepper motors
* 3 Smooth Stepper Drives
* USB Motion Controller board (with up to 100 kHz operation)
* Pre-wired and ready to cut
* Home Switches on all axis
* Spindle Control (Automatic on/off of Spindle and RPM via G-Code)
* Switching Power Supply
* Dust Proof Control Box
* GRBL Controller over USB Connection
* Copy of Candle Controller Software and Machine profile on USB Stick

Required to finish:
* Control computer (Windows XP to Windows10 with USB port)
* Copy of Mach3 License
* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)
NOTE: This machine comes with Water-Cooled spindle with VFD and NOT Mikta Trim Router

]]> CNC Router Machine 50″x100″ (4’x8′) Econoline https://vbottech.com/product/vb9850e-s/?utm_source=rss&utm_medium=rss&utm_campaign=vb9850e-s Fri, 17 May 2019 23:09:10 +0000 https://vbottech.com/?post_type=product&p=569 Note: This is a custom size machine base on the 4×4 with the Y axis lengthen to 100″ Travel. 

This is a CNC Router or Milling machine with a working envelope of 50″ by 1000″ or  (1270mm x 2560mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1270 mm)
Y = 100″ (2560mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 64″ x 108″ x 18″ (1620 x 2750 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23 stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> CNC Router Machine 50″x50″ (4’x4′) Econoline (Free Shipping) https://vbottech.com/product/vb5050e-s/?utm_source=rss&utm_medium=rss&utm_campaign=vb5050e-s Thu, 16 May 2019 19:39:23 +0000 https://vbottech.com/?post_type=product&p=562

This is a CNC Router or Milling machine with a working envelope of 50″ by 50″ or (1280mm x1280mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1275 mm)
Y = 51″ (1300 mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 63″ x63″ x 18″ (1600 x 1600 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> CNC Router Machine 50″x50″ (4’x4′) Econoline https://vbottech.com/product/vb5050e/?utm_source=rss&utm_medium=rss&utm_campaign=vb5050e Tue, 02 Apr 2019 06:38:30 +0000 https://vbottech.com/?post_type=product&p=506

This is a CNC Router or Milling machine with a working envelope of 50″ by 50″ or (1280mm x1280mm). The machine comes complete with control box/drivers and stepper motors. It’s controlled by GRBL which connects your computer via USB. The wooden table top (3/4″ MDF) is not included. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.

 

Travel (Cutting Area):

X = 50″ (1275 mm)
Y = 51″ (1300 mm)
Z = 4.3″ (110mm) (Z clearance under gantry is 3″)

Overall footprint: 63″ x63″ x 18″ (1600 x 1600 x 460mm)

Includes:

  • Aluminum frame & hardware
  • 4 – NEMA-23stepper motors
  • Pre-wired with terminal connectors
  • Cable Drag Chain to keep wires neat and tidy
  • Control Box and high-torque drivers
  • Industrial grade motion controller (GRBL firmware)
  • Homing switches
  • USB Stick with Control software (Candle-vBot-GRBL)
  • Cutting spindle (Makita 1.25 HP Router)
  • Spindle Relay Module (Automatic on/off of Spindle)
  • One 0.25″ Carbide end mill cutter
Required to finish (Not Included):
  • Wooden Table Top (48″ x 60″ MDF)
  • Control Computer (Windows XP to Win10 with USB)
  • CAD/CAM Software of your choice (Cut2D, VCarve, SheetCAM, Fusion 360)

]]> Tabletop CNC Router https://vbottech.com/product/desktop-cnc-router-13x07/?utm_source=rss&utm_medium=rss&utm_campaign=desktop-cnc-router-13x07 Sat, 09 Mar 2019 16:16:44 +0000 https://vbottech.com/?post_type=product&p=480 CNC Router or Milling machine with a working envelope of  13" by 7" by 4.5" Travel]]>
The machine is completely assembled and testing and ready to cut right out of the box. No assembly required. Table top is T-Slot Aluminum for easy part hold down. This machine uses Rigid Linear Guide Ways on all axis, unlike other machines of this size which usually uses round guide shaft that are only supported on the ends.  All Drive system uses precision stainless steel lead-screw with anti-backlash nuts. This machine is specially designed with a box frame that allow for panels to be added the the frame and have it fully enclosed and keep dust in the machine while cutting and also added safety.

 
Travel:
X = 13″ (1320mm)
Y = 7″ (1320mm)
Z = 4.5″ (130mm) (Z clearance under gantry is 3.5″)
 
Overall footprint: 19.75″ x 17.25″ x 18″ (500x 440 x 460mm)
Table Top Size: 11.5 x 7.5″ (290mm x 240mm)
 
Includes:

* Fully supported Linear Guide Ways on X, Y and Z

* Spindle (Makita 1.25HP Router)

* Router Mount
* 3 NEMA 23 Stepper motors
* 3 Smooth Stepper Drives

* USB Motion Controller board (with up to 100 kHz operation)
* Pre-wired and ready to cut
* Home Switches on all axis
* Spindle Relay Module (Automatic on/off of Spindle)
* Switching Power Supply
* Dust Proof Control Box
* Demo Copy of Mach3 on USB Stick and Machine Profile so setup is easy (Requires Mach3 License)
 
Required to finish:
* Control computer (Windows XP to Windows10 with USB port)
* Copy of Mach3 License
* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)

]]> CNC Router 50×24 https://vbottech.com/product/cnc-router-50x24/?utm_source=rss&utm_medium=rss&utm_campaign=cnc-router-50x24 Fri, 08 Mar 2019 07:20:51 +0000 https://vbottech.com/?post_type=product&p=442 This is a CNC Router or Milling machine with a working envelope of  50" by 24" or (1320mm x 610mm). ]]> The machine comes almost completed with the only thing not included is the wooden table top and a license of Mach3. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.
Check out the video on our YouTube channel under “vBotTech”
Travel:
X = 52″ (1320mm)
Y = 24.25″ (610mm)
Z = 5″ (130mm) (Z clearance under gantry is 3″)
Overall footprint: 63″ x 36″ x 18″ (1600 x 915 x 460mm)
Includes:
* Computer (Laptop with SSD Hard-drive) Windows10 OS
* Pre-installed Mach3 with Drivers and Profile for the machine configured and calibrated.
* Control box package
* Fully supported Linear Guide Ways on X and Y
* USB Motion Controller board (with up to 100 kHz operation)
* Spindle (Porter Cable 892 Router)
* Router Mount
* 4 Nema 23 Stepper motors
* Pre-wired and ready to plug in to control box
* Cable Drag Chain to keep wires neat and tidy
* Home Switches
* Spindle Relay Module (Automatic on/off of Spindle)
Required to finish:
* Wooden Table Top (2 pc. 3/4″ x 24 x 30 MDF for Birch Plywood)

* Copy of Mach3 License

* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)


]]> CNC Router 50×50 https://vbottech.com/product/cnc-router-50x50/?utm_source=rss&utm_medium=rss&utm_campaign=cnc-router-50x50 Fri, 08 Mar 2019 06:01:17 +0000 https://vbottech.com/?post_type=product&p=430 This is a CNC Router or Milling machine with a working envelope of  52" by 52" or (1320mm x 1320mm). ]]> The machine comes almost completed with the only thing not included is the wooden table top and a license of Mach3. The unit was fully assembled and tested then broken down in several pieces for shipping. (Re-assembly will take no more than 30 min to 1 hr). The drive system on the X and Y is a wide belt system with steel reinforced for a smooth and rigid operation. The Z is driven by precision stainless steel lead-screw with anti-backlash nut.
Check out the video on our YouTube channel under “vBotTech”
Travel:
X = 52″ (1320mm)
Y = 52″ (1320mm)
Z = 5″ (130mm) (Z clearance under gantry is 3″)
Overall footprint: 63″ x 63″ x 18″ (1600 x 1600 x 460mm)
Includes:
* Computer (Laptop with SSD Hard-drive) Windows10 OS
* Pre-installed Mach3 with Drivers and Profile for the machine configured and calibrated.
* Control box package
* Fully supported Linear Guide Ways on X and Y
* USB Motion Controller board (with up to 100 kHz operation)
* Spindle (Porter Cable 892 Router)
* Router Mount
* 4 Nema 23 Stepper motors
* Pre-wired and ready to plug in to control box
* Cable Drag Chain to keep wires neat and tidy
* Home Switches
* Spindle Relay Module (Automatic on/off of Spindle)
Required to finish:
* Wooden Table Top (2 pc. 3/4″ x 24 x 60 MDF for Birch Plywood)
* Copy of Mach3 License
* CAD/CAM Software of your choice (Cut2D, VCarve, Fusion 360)

]]>